{"product_id":"autoglym-polar-seal-1l","title":"Autoglym Polar Seal - 1L","description":"\u003cp\u003eAutoglym's Polar Seal is the show-stopper of our Polar range, delivering a super protective, hydrophobic coating for a quick and easy high-gloss finish that's always showroom worthy.\u003c\/p\u003e\n\u003ch3\u003eSEAL OF APPROVAL\u003c\/h3\u003e\n\u003cp\u003eThe third and final stage of our three stage Polar process - Polar Seal. A light foaming sealant that quickly repels water and dirt, helping to protect your paintwork, so it shines as bright as the day it left the showroom. All to give your vehicle's exterior the finest finish that stands the test of time.\u003c\/p\u003e\u003ch4\u003eRAPID APPLICATION\u003c\/h4\u003e\n\u003cp\u003eNo buffing required here. Simply mix 40ml of Polar Seal with 200ml of water, spray with a Polar Blaster onto your clean, wet vehicle, before immediately rinsing off with a pressure washer. Then dry with an InstaDry or Ultra-Soft Drying Towel.\u003c\/p\u003e\u003ch4\u003eWATER REPELLENT SEAL\u003c\/h4\u003e\n\u003cp\u003eThis highly durable, super hydrophobic sealant provides a 'shield' to the surface of your vehicle. Not only is it great for repelling water and dirt, Polar Seal reduces drying time, while offering paintwork protection for effortless follow up washes.\u003c\/p\u003e\u003ch4\u003eHIGH GLOSS FINISH\u003c\/h4\u003e\n\u003cp\u003eWith minimum effort Polar Seal delivers a maximum high gloss finish. So, you've got protection and a pristine sheen. Plus, the durable coating makes maintaining the shine easier and quicker than ever before.\u003c\/p\u003e\n\u003ch3\u003eHow To Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eBefore you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.\u003c\/li\u003e\n\u003cli\u003eWe recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork.\u003c\/li\u003e\n\u003cli\u003eOnly a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish.\u003c\/li\u003e\n\u003cli\u003eSpray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen.\u003c\/li\u003e\n\u003cli\u003eThoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur.\u003c\/li\u003e\n\u003cli\u003eUse Autoglym Fast Glass to clean the windscreen and wiper blades to ensure no smearing occurs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eWe do not recommend applying more than once a month.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolar Seal is not suitable for use on soft top convertibles or motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not store diluted product. Please rinse foam bottle and pressure washer lance after use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop Tip:\u003c\/strong\u003e For the optimum finish, dry with the Autoglym InstaDry cloth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for use on matte or satin paint, wraps and satin vinyl decals.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Polar Seal?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is a coating designed specifically for use in a pressure washer. It is the coating element (third and final stage) of the three-stage Polar range process. It is preceded by the prewash – Polar Blast and shampoo - Polar Wash.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs Polar Seal wax safe?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePolar Seal is wax safe and we would recommend that if there is wax on the paintwork that Polar Seal is used as a top up. There is no need to remove the wax or other protection before applying Polar Seal.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs Polar Seal pH Neutral?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePolar Seal is pH Neutral and can be used on full exterior of the vehicle, avoiding the windscreen.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDo I use Polar Seal instead of a wax?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePolar Seal is a durable hydrophobic coating. However, it does not offer the same long-term protection as Ultra High Definition Wax or Extra Gloss Protection.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eShould I agitate the foam once I have applied Polar Seal?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNo, it is not necessary. The vehicle should be clean before applying Polar Seal, ideally with Polar Blast and Polar Wash. Polar Seal should be sprayed over all exterior surfaces apart from the windscreen and then rinsed off immediately. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat is the recommended Dilution rate for Polar Seal?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWe would strongly recommend not using more than 40ml Polar Seal and 200ml water. Over use may cause white spotting and significantly compromise the effectiveness of Polar Seal. Using more product will not improve the depth of shine or increase its durability.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy is it not recommended to use on the windscreen?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePolar Seal contains silicones, which in some cases, can create smears once wiper blades are used on the windscreen. We would recommend cleaning your windscreen after you have applied Polar Seal to the rest of your car as part of your car cleaning process.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow long should I leave Polar Seal on my paintwork?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is important that Polar Seal does not dry on to the surface of the vehicle. Once the car has been coated it should be rinsed immediately. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan Polar Seal be used on my alloys and exterior plastics? \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eYes, apart from the front windscreen we would recommend Polar Seal can be used on all exterior surfaces.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it ok to leave Polar Seal in my foamer bottle?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWe would recommend that only the product needed for a single application is used. We also recommend that the foamer bottle is rinsed thoroughly after use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow frequently do I need to apply Polar Seal?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThere is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat are the usage instructions for Polar Seal?\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSee 'How to use this product'.\u003c\/p\u003e","brand":"Autoglym","offers":[{"title":"Default Title","offer_id":50216643362871,"sku":"D-AGPS1000","price":63.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2670\/1362\/files\/PSL001_1400x1400-09_2.jpg?v=1790055326","url":"https:\/\/www.detailstore.com.au\/en-cn\/products\/autoglym-polar-seal-1l","provider":"The Detail Store","version":"1.0","type":"link"}