24Hr Turnaround Click & Collect | AfterPay & ZipPay (Orders $150+) | Same Day Dispatch for Orders before 12PM AEST

Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit
Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit
Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit
Product image 1Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit
Product image 2Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit
Product image 3Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit

Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit

Regular price $429.90 AUD Sale price $491.40 AUD

Unit price per 

Ceramic Coating

Size

The Apex Customs Grasshopper 2.0 Mini DA Oberk Correction and Gtechniq Ceramic Kit consists of:

  • Apex Customs Grasshopper 2.0 Random Orbital Polisher 12mm
  • 3" backing plate
  • 3" Green German Foam Cutting Pad
  • 3" Orange German Foam Polishing Pad
  • 3" Red German Foam Finishing Pad
  • Oberk Supreme Cut Compound - 237ml
  • Oberk Supreme Polish One Step Polishing Compound - 237ml
  • GTECHNIQ Crystal Serum Light or GTECHNIQ EXOv4 Ultra Durable Hydrophobic Coating or GTECHNIQ C1 Crystal Lacquer Coating (30ml/50ml)
  • Instruction manual
  • Manufacturers Warranty (12 months)

Bringing you the Oberk Detailer's Kit which combines the Grasshopper 2.0 DA Polisher together with our renown German Foam Pads (Cutting + Polishing + Finishing) and Oberk Supreme Cut Compound - 237ml + Oberk Supreme Polish One Step Polishing Compound - 237ml compounds and GTECHNIQ Crystal Serum Light or GTECHNIQ EXOv4 Ultra Durable Hydrophobic Coating or GTECHNIQ C1 Crystal Lacquer Coating (30ml/50ml)

Don’t be fooled by the Grasshopper’s diminutive size. This little polisher is a true workhorse and is absolutely made for paint correction and removing swirls.

The Grasshopper 2.0 completes our range of Dual Action Random Orbital polishers and is an absolutely essential bit of kit for any detailer.

With its 12mm orbit and 3” backing pad, the Grasshopper gets into the tight areas where the larger dual action polishers simply cannot get to. Think door jams, sills, tricky lips and lids.

Boasting a new rubberised grip, increased ventilation ports for improved heat dissipation and NSK bearings all round, the Grasshopper 2.0 was made for excellent ergonomics over prolonged use.

Combine this with a set of our German Foam 3” pads and a cutting, polishing and finishing polish to tackle any job at hand.

User manual here

KEY FEATURES:

  • Compact & precise 12mm throw to get you through tight spots such as door trims; side mirrors and curved edges
  • 600 Watts of power for paint correction, polishing and waxing applications
  • 2000 - 6000 O.P.M.
  • 6 levels of speed with trigger lock
  • Easy to use, great for beginners and experts alike
  • Quality tested & CE certified

    Oberk Supreme Cut (SC) was formulated to provide a premium option for compounding or heavy polishing.  With the most innovative and premium abrasives in the world, this polish combines unmatched cutting ability, and offers incomparable results. This compound is required for step 1 in the Oberk Supreme system.

    • Removes p1500 sanding marks
    • Perfect for use on all types of machines including DA, forced rotation, rotary, and long throw DA machines
    • Water based formula provides a superior option when used on all types of foam, wool, and microfiber pads
    • Silicone free, and body shop safe
    • Works with all automotive finishes and gel coat
    • Use when removing sanding marks in new paint, and cutting heavy defects and swirls in cured paint
    • No fillers

    Instructions

    STEP 1: Correction Stage

    Suggested pad to use: Oberk Orange Microfiber Cutting Pad.

    • Always lightly prime the pad to avoid dry buffing. Apply 4 pea sized dots to the face of foam or microfiber cutting pad, wool pads may require additional product.
    • Spread product over a 16 x 16" area, and polish. Wipe excess residue, and inspect.

    Oberk Supreme Polish (SP) was formulated to provide a premium option for polishing and finishing on even the softest, dark painted finishes, and brilliant clarity. With the most innovative and premium diminishing abrasives in the world, this polish offers what other polishes lack to provide. The formula provides a perfect balance of consistency or viscosity, ability to work well with microfiber and foam pads, and without the use of heavy solvents, silicones or oils. This polish is required for step 2 in the Oberk Supreme DUO system.

    • Perfect for use on all types of machines including DA, forced rotation, rotary, and long throw DA machines
    • Water based formula provides a superior option when used on all types of foam and microfiber pads
    • Silicone free, and body shop safe
    • No fillers
    • Works with all automotive finishes and gel coat
    • Use as a one step polish or as a second step after Oberk Supreme Cut

    Instructions
    This is step 2 in the Oberk Supreme DUO system. This product is considered a finishing or fine scratches removal polish.

    Suggested pad to use: Oberk Red Supreme Polishing Pad.

    DUO STEP 2: Finishing Stage

    • Prime your foam polishing pad with Supreme Polish. Use 4-6 pea-sized drops. Apply 2 pea-sized dots of product on sections after work. Work in 2 x 2' areas and handle product until a fine film develops.
    • Remove residue with a quality microfiber towel.

    Our most popular GTECHNIQ Ceramic Coatings now comes as a bundle at an even better price.

    GTECHNIQ Crystal Serum Light CSL 5 Year Paint Protectant Coating

    Crystal Serum Light is the prosumer version of the world famous GTECHNIQ Accredited Detailer Crystal Serum Ultra. It offers 80% of professional Serum Ultra’s performance, but if applied incorrectly can be machine polished from your vehicle's paintwork.

    When it comes to adding gloss, resisting swirls, contaminant and dirt repellency, GTECHNIQ Crystal Serum Ultra and Serum Light are the pinnacle in paint protection.

    Serum Light forms an ultra-durable, high-gloss, slick to the touch, chemically bonding inorganic layer of 9h optically clear ceramic. Once applied, gloss levels will remain in the upper 90th percentile for significantly longer when compared to traditional paint protection products, and cleaning your car will be a breeze.

    The high density ceramic layer is resistant to chemicals ranging from pH2 - pH12. This characteristic also makes bonded contaminants such as tree sap, tar, and hard water spots, easy to remove.

    Unlike mainstream wax and organic polymer coatings, Serum Light can resist much higher and lower temperatures. Temperatures as low as -40­° to as high as +250°c.

    Voted Best Protective Product - Detail Store Annual Awards.

    Features & Benefits:

    • User-friendly - very easy to apply
    • Exceptional gloss levels
    • CSL provides a tough, durable resistance to wash-induced swirls
    • Provides a slick finish inhibiting the adherence of contaminants
    • Inhibits staining from industrial & environmental fallout
    • One layer provides up to 80% of the protection of Crystal Serum
    • Can be removed using traditional 3 stage polishing techniques
    • Can be layered for increased protection
    • Can be used in combination with C2 Liquid Crystal for additional glossy & hydrophobicity

    Application:

    • To apply Crystal Serum Light (CSL) make sure your vehicle is indoors and can stay indoors for 12 hours after application, do not apply in direct sunlight
    • Only apply the product at a temperature between 5°c and 25°c
    • Shake well and wear gloves
    • Wash and decontaminate W6 your paintwork thoroughly prior to application. If required, polish your paintwork, either by machine or hand, to remove any imperfections
    • Spray Panel Wipe into a GTECHNIQ MF1 Microfibre Cloth and wipe down each panel in small sections
    • Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation
    • Replace the lid on the bottle and set aside - do not keep the bottle in your hand as this promotes premature curing
    • Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the bodylines of the vehicle
    • Immediately 10 to 15 seconds remove residue with an MF1 cloth - you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of  2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth- this can make buffing residue difficult
    • Inspect the surface for residue with a bright, diffused light source
    • If you remove residue and it cured fully you should polish the area and reapply CSL
    • As soon as you finish, put you MF1 cloths in water, wash and dry them as soon as possible
    • Wait approximately 2 hours after applying CSL to apply EXO Ultra Durable Hydrophobic Coating, or C2 Liquid Crystal
    • Store in a cool, dry place
    • Use within 3 months of opening

    GTECHNIQ EXOv4 Ultra Durable Hydrophobic Coating 24 Month Durability

    EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

    It has a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish.

    All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology.

    Features & Benefits:

    • Extreme hydrophobicity – water slides off treated surfaces
    • Forms a hard film that makes water spots easier to remove
    • Resistant to highly alkaline or acidic wash solutions
    • Now aids the prevention of micro-marring
    • Repels dirt, oils, & fallout
    • Enhanced durability – lasts for up to 2 years
    • Can be used as a stand-alone coating or as a top coat
    • For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
    • For larger cars, select the 50ml

    Included in Kit:

    • 1 x EXOv4 – 30ml
    • 1 pair nitrile gloves
    • 1 x AP2 Ultra Soft Foam Filled Applicator Pad
    • 1 x Master Instruction Leaflet
    • 1 x WS1 GTECHNIQ Window Sticker

    Instructions:

    • EXOv4 can be applied as a stand-alone sealant or as a top layer for Crystal Serum Light (CSL) or C1 Crystal Lacquer (recommended particularly for darker colours, easy to mark paintwork or if added swirl resistance and durability are required).
    • Leave between 2 and 12 hours for C1 to cure before applying EXO v4
    • Can be applied immediately over CSL (start at the same point and follow the panels in order). Do not leave CSL for longer than 24 hours if planning to apply EXOv4.
    • Ensure vehicle is clean and dry, and the paintwork is swirl-free and prepared with Panel Wipe (not necessary if applying over C1 / CSL).
    • Ensure panel is warmer than 5 degrees Celsius.
    • Apply 5 – 10 drops of EXOv4 to the supplied applicator and work the liquid into the pad to get an even saturation.
    • Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm at a time.
    • If the panel is 15 degrees C or lower, allow EXOv4 to cure for two minutes, then remove residue with a soft clean microfibre. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing. For temperatures higher than 25 degrees, buff immediately.
    • With a new microfibre, buff panels again to ensure all residue entirely removed.
    • Apply a second layer of EXOv4 immediately, to ensure ease of buffing
    • Allow EXOv4 to cure for a minimum of 12 hours prior to exposing it to rain.
    • Allow at least 1 week before washing your vehicle.

    Storage:

    • Unopened bottles of EXOv4 have a 12 month shelf life from time of purchase
    • Opened bottles of EXOv4 should be stored in a cool, dry area out of direct sunlight
    • Opened bottles have a maximum life of 3 months

    C1 is extremely easy to apply and ideal for someone new to applying ceramic coatings, or for someone who wants a coating that is durable, but not too much hassle to apply.

    With good gloss retention, C1 Crystal Lacquer becomes the functional surface of the cars paintwork.

    C1 forms a crystalline film which is hard - this characteristic makes it effective at preventing minor scratching from poor wash technique on relatively soft automotive paint.

    The coating is good for gloss retention, but because it does not add much additional gloss, it is ideal for matte paint finishes.

    Features & Benefits

    • 3 years durability 
    • Excellent swirl mark resistance
    • Crystal clear finish
    • Long-lasting protection from UV, dirt & swirl resistance
    • Uses nano technology - a little goes a long way!
    • Can be used on cars, motorcycles, boats & planes!
    • Forms ultra strong chemical covalent bond with surface of paintwork
    • Forms ultra hard sub-micron crystalline film inhibiting scratches & swirls

    Application:

    • Only apply in temperatures 5°c and above, indoors, out of direct sunlight
    • Wear gloves provided
    • Soak the application pad with several drops of product
    • Replace the lid on the bottle and set to one side - holding in your hand while detailing your car may promote premature curing
    • Spread product on a small panel, or ½ a large panel, at a time
    • Remove residue immediately with a MF1 ZeroR Microfibre Buff Cloth
    • You may need to buff the same area several times to remove residue, so use at least two MF1 cloths at any one time. Make sure you rotate the cloths quickly so that the C1 does not cure in them - this can make residue harder to remove
    • Change your application pad after 3 to 4 applications
    • If you miss removing residue and it cures fully, you should re polish this area and reapply C1
    • As soon as you finish, put your microfibres in water, wash them as soon as you can to prevent the product crystallising and making them unusable
    • Leave your vehicle indoors for 12 hours before exposing it to the elements
    • If you are applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal over the C1, leave at least 4 hour before application
    • Store in a cool, dry place
    • Use product within 3 months of opening

    Close (esc)

    Want to insure your order?

    For only $4.90, insure your order for peace of mind.

    Add here

    Want to insure your order?

    Click here to insure your order for only $4.90.

    Search

    Shopping Cart

    Your cart is currently empty.
    Shop now

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00 AUD
    Shipping
    Total

    Shipping Address

    Shipping Methods