Introducing the professional grade 'Nano Quartz' ceramic coating kit designed for all painted surfaces including PPF & Vinyl which comes complete with the Base Coat, Prime, and Top Seal including an applicator block, several suede cloths, nitrile gloves and spray bottles.
BASE COAT is a 9H layer of glass that cures over painted surfaces to increase the hardness of the surface. A 110° water contact angle ensures tight water beading resulting in hydrophobic self-cleaning properties. BASE COAT has a durability of 24 months.
PRIME is a surface preparation spray designed to effectively remove grease and any polish oils that may remain on the surface. PRIME prepares the surface for BASE COAT to maximise bonding between the surface and the ceramic coat.
TOP SEAL is a silicon-based polymer based spray on sealant to prevent water spotting during curing and extends the hydrophobic properties of BASE COAT. Use every 3 months to boost gloss levels and prolong hydrophobic properties
- Extreme 9H hardness (pencil scale)
- Immense gloss, ultimate "wet look" set to last up to 2 years
- 110° water contact angle for extreme hydrophobicity
- Low VOC, high solid ceramic coating
- Non carcinogenic
- Increased resistance to all contaminants and traffic film
- Resistance to light scratching and water spots
- Safe on all paintwork surfaces including PPF & Vinyl.
For best results, the surface must be prepared meticulously. All surfaces must be thoroughly washed and decontaminated with iron removers/clay bars (even if the car is new).
Any defects existing in the paintwork will be 'locked in' by the coating, therefore you will want to correct paint where necessary to ensure your car will look its best when protected.
Perform machine polishing if necessary. If you don't own a machine or compounds, click here for further information.
For a full step by step guide, refer to the user manual attached.