GYEON quartz Q2 MOHS is one of the hardest automotive paint coatings or protections on the market. Based on patented Japanese technology, adding great gloss and boasting a good self-cleaning ability, this coating can protect your car’s paint for well over a year.
This new Gyeon paint protection coating is designed to offer improved scratch resistant, especially useful for softer Asian automotive paint coatings. It can even add extra hardness to the European ones – on average MOHS will add a further 3-4H to the hardness (9H coating) This means annoying swirls and spider webbing should not occur anywhere near as much, although careful washing is still necessary.
Gyeon MOHS also offers a contact angle of well over 95 degrees, meaning water beads/sheets off very easily so the paint is less susceptible to water marks. It has a great self-cleaning ability even after rain, which makes washing a breeze as dirt is released from the paint much more easily.
With excellent durability, tests show that over 80% of the super hydrophobic effect still remained after 12 months. Gyeon paint protection provides optimum car protection for the person who is looking for that long-term option.
Q2 MOHS Coating from Gyeon will leave your paintwork protected and with an incredible deep, glass-like finish that is easily maintained to leave your car looking like new. This kit even comes with Gyeon Cure, which is ideally used after a regular wash to add even more gloss and ongoing protection for your car.
This Gyeon Paint Protection Kit contains:
1x MOHS 30ml, 1x Cure 100ml, applicator set and instruction manual.
NOTE: Once the bottle is opened, the curing process begins. Do not leave dropper attached to bottle - use screw cap as provided, and be sure to use coating within a 6-8 weeks of opening and store in a cool area away from heat or humidity.
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and use CarPro Eraser/Gyeon Prep to remove all traces of old wax, polish or oils with a new good quality microfibre cloth. It is highly recommended to use a good surface cleaner such as Gyeon Prep/CarPro Eraser before application of any Gyeon Coating.
Shake the Gyeon MOHS well, take one of the applicator cloths on top of the applicator block and apply a small amount of coating to it. Wipe over a section (about half a panel) gently ensuring you pass over all the area at least two to three times to provide an even thick coverage. Allow 10s-30s depending on heat/humidity the coating should be hazed, then wipe off completely with a good quality microfibre cloth. Repeat section by section for all other panels.
Ensure after 2-4 hours you apply a Second Coat. This is amustfor maximum durability, gloss and shine from MOHS!
We recommend not getting the coating wet for at least 24 hours to allow it to properly cure, and not washing your car for a minimum of 7 days.
Please note we do not exchange coatings, so please choose carefully before purchase and if you’re unsure which is best suited to your requirement please feel free to call or email us any time.
It is advised that you coat your car in a cool and covered area. Do not apply in direct sunlight.
GYEON Quartz Q2 PureQuartz Protection produces a thick, hard and extremely hydrophobic coating. GYEON quartz Q2 Pure brings the appearance of the paintwork to a new level, delivering pure candy gloss. Its new thick formulation requires only one layer, making the application process quick and user-friendly for all levels of enthusiasts and detailers.
Gyeon Q² Pure and its simple, one layer application, makes it the technologically advanced and chemical resistant alternative for natural and synthetic protective products. It is a highly advanced product based on silicon dioxide (SiO2), which only requires a similar amount of technique and effort as a natural car wax to apply, even for a enthusiast. The Gyeon Q² Pure kit includes an ergonomic applicator, which allows fast and effective application of the product.
Gyeon Q² Pure combines two crucial qualities of a great coating – a very high level of gloss and extreme durability. While offering durable and highly chemical resistant protection against all types of environmental impact, fantastic depth and pure candy gloss are the main features of the coating. The glass-like-gloss created by this sealant is a a worthy rival to quality natural waxes.
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and use Gyeon Prep to remove all traces of old wax, polish or oils with a new good quality microfibre cloth. It is highly recommended to use a good surface cleaner such as Gyeon Prep before application of any Gyeon Coating.
Note: Once the bottle is opened, the curing process begins. Do not leave dropper attached to bottle - use screw cap as provided and store in a cool area away from heat or humidity.
Gyeon Quartz Q2 Syncro - 50ml
Gyeon Quartz Q² Syncro is a multi-layer ceramic coating system designed to not only enhance and protect your paintwork for years, but add further gloss, add super-hydrophobic properties and protect your paint against environmental fallout.
Q²Syncro offers incredible slickness, amazing hydrophobic properties, whilst Q² Skin is a thick, durable and flexible top coating, offering great self-cleaning abilities offering not only true Ceramic Paint Protection that can be applied in your own home that lasts up to 2 years+ but also provide easy on-going maintenance and care.
This kit contains everything for application such as application suede cloths, application blocks, Q² Syncro coating, Q² Skin top coating, Q²M Cure and application manual.
We highly recommend that Q² Syncro is only suitable for advanced enthusiasts who previously have experience with Quartz Ceramic coatings, and professional Detailers.
For best results: The use of Gyeon Prep or CarPro Eraser Surface Cleaner is a must before any Gyeon Coating application
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry.
Clay your car if required prior and use Gyeon Prep or CarPro Eraser to remove all traces of old wax, polish or oils with a new good quality microfibre cloth. It is highly recommended to use a good surface cleaner such as Gyeon Prep or CarPro Eraser before application of any Gyeon Coating.
Apply as per instructions; using the applicator and suede on a small section at a time, wiping off straight away. Check your work as you go for any smears or residue - we always suggest taking a second microfibre cloth as a final wipe down after you have finished the whole panel.
Allow to cure before moving to the second/final coating, then repeat a similar process.
Once both products are applied; allow a minimum of 12 hours inside before driving or getting wet. And a full week before washing your car.
Gyeon Quartz Q2 Trim - 30ml
Gyeon Quartz Q2 Trim Coating is a highly advanced quartz coating specifically made to revive and protect exterior trim and plastics on your car. Exterior plastics can fade quickly in Australia with the high levels of harmful UV radiation, and be discoloured (even ‘bleached’) by powerful chemicals used by some car washes and acid rain.
Because Trim is a highly advanced coating it can last for over 12 months or over 15,000kms – compare that with your average trim dressing of just a week or two!
Gyeon Trim can bring mildly faded plastic and trim back to life, especially when thoroughly cleaned prior and this SiO2 coating can penetrate into the pores of the plastics. The incredibly strong bond that is then created also provides a hydrophobic effect (like on paint) where water simply bounces off. This makes the trim and plastics easier to clean and gives you a nice water beading effects to repel dirt and grime that used to get embedded in them.
Gyeon Trim can be applied to all porous exterior plastics and trim including grills, trim, surrounds, bumpers and even headlights to provide ongoing UV protection for these sensitive parts. It leaves a deeper darker finish which is Matt/Satin and does impart a false gloss finish, so can be used on all types of plastics.
It is recommended that you use Gyeon Prep Surface Cleaner/CarPro Eraser or similar before application of Gyeon Trim. Failure to do so could affect your Trim’s finish.
Ensure your trim or plastic surfaces are clean, dry and free from contamination; so wash thoroughly and dry (use a brush on textured surfaces to clean properly). We suggest ultimate durability can be achieved with a good cleanse with Gyeon Prep/CarPro Eraser to remove all traces of old wax, polish or oils.
Shake the Gyeon Trim well, take one of the applicator cloths on top of the applicator block and apply a small amount of Trim. Wipe over a section (about 10cm x 10cm) gently ensuring you pass over all the area at least twice to provide even thick coverage.
Wait for 2-5 minutes depending on heat/humidity the coating should be absorbed and dry, if not then wipe off completely with a good quality microfibre cloth.
Repeat for all other sections on your trim until revived and coated. We recommend not getting the coating wet for at least 6 hours to allow it to properly cure.
Always coat in cool conditions, not in direct sunlight.
Gyeon Q2 Rim - 30ml
High Temperature Resistant
Wheels, just after the engine bay and the exhausts, are those vehicles’ components that are most exposed to high temperatures. Q2 Rim has endurance capability exceeding 300 grades Celsius without any damage to its original properties. The fact that this quartz coating is dedicated to rims exclusively is its asset and introduces a new quality within the field of rim protections, particularly if juxtaposed to conventional, synthetic wax-based protections.
Suitable for Every Type of Wheel Finish
There are at least a couple of various wheel rim types available on the market, e.g. wet painted, powder coated, anodized or polished. Q2 Rim is an appropriate product to secure each and every of them. Even the owners of models with polished lips have registered that the need refresh the so-called mirror effect, in comparison with other rim protective products, is significantly less frequent.
Similar to other genuine SiO2-based coatings, Q2 Rim presents superb self-cleaning abilities. It results in limiting time needed to keep wheels, especially those having complicated patterns, impeccably clean. It is protects against too much dust from brake pads deposited on wheel rims and facilitates regular wash of rims with clean water under pressure. Using, additionally, a pH-neutral rim cleaning product will make the whole maintenance process easier. Q2 Rims, unlike other conventional rim protection forms, is also resistant to more aggressive cleaners.
In the case of wheels protection it is durability that certifies the top-class and efficient character of the product. Our protective product is resistant not only to high temperatures, but also to aggressive dust from brake pads. The durability of 6 months/8000KM should be reached effortlessly.
Once the bottle of coating is opened, the curing process begins, even if you put the cap back on tightly. Once opened, you should use the coating within one month's time.
Please be sure to use all coatings as soon as you can from the time you receive them.
All coatings have a limited shelf life due to the chemical nature of how they crystallize. Look to use coatings within 4-6 months of receiving them (less if bottle is opened).
Gyeon Q2M Prep - 500ml
Gyeon Quartz Prep is a must have Surface Cleaner that prepares paint, wheels and glass perfectly before applying a protective product. Before you seal, wax or coat your paint it is important that it is squeaky clean and free from contamination, old waxes and polishes to allow the correct bonding and provide the durability or protection stated.
Designed to dissolve old waxes and polishes Gyeon Prep is not simply a degreaser, it lifts oils and residue that can also be left behind after polishing to prepare the paint surface perfectly for the protection stage. The other key benefit of Gyeon Prep is that it creates an anti-static surface, which is very beneficial when you are applying coatings and protection to your car.
Can be used on most surfaces prior to coating, such as paint, wheels, chrome, trim etc.
Ensure your exterior surfaces are clean, dry and free from contamination; so wash thoroughly and dry. Also clay your car if required prior to ensure rough contamination is removed.
Shake Gyeon Prep well and spray onto a small section (quarter to half a panel) of the surface or a quality microfibre, wipe lightly over the section until completely gone. Repeat on the next section until the paint or surface is squeaky clean.
Gyeon Full Exterior Ceramic Coat (Pure/MOHS/Syncro)
Average rating: 5.0, based on