Meguiar’s M105 Mirror Glaze Ultra-Cut Compound is used to remove scratches, severe swirls/holograms, acid rain and other defects from your paint finish and leave it with a best-in-class mirror-like gloss. Our exclusive super micro-abrasive technology features ultra-fast cutting ability to remove 1200 grit or finer sanding marks. This professional grade formula is safe and effective on all glossy paint finishes, including clear coats.
DEFECT REMOVAL: Great for removing scratches, defects, acid rain and severe swirls/holograms
ULTRA-FAST COMPOUNDING: Ultra-fast cutting removes 1200 grit or finer sanding marks
SUPERIOR FINISH: Exclusive super micro-abrasive technology leaves best-in-class finish
CLEAR COAT SAFE: Safe and effective on all glossy paint finishes including clear coats
VERSATILE USE: Formulated for use by hand, dual action polisher or rotary buffer, and is body shop safe. Also available in 8 oz and 1 gallon sizes
Application
Method 1: Applying by hand
Distribute a small amount of compound on aMeguiar’s Soft Foam Applicator Pad
Work in a 1-2 square foot area in a circular pattern, making 4-5 overlapping passes per section to ensure that the compound has been properly applied.
Without letting the product dry, use a fresh, cleanMeguiar’sSupreme Shine Microfiber Towelto remove the residue.Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.
Method 2: Applying by Meguiar’s MT300 Dual Action Polisher
AttachMeguiar’s Red Foam DA Cutting Discto theMT300 DA Polisher. Dispense a small amount of the compound directly onto the pad.
Set theMT300 DA Polisherspeed between 4,800-5.800 OPM’s. Work in a 2’ x 2’ section applying 2 to 3 overlapping passes with moderate pressure, followed by light pressure for following 2 passes. Do not let product fully dry.
Wipe off the residue with a fresh, cleanMeguiar’sSupreme Shine Microfiber Towel.Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.
Method 3: Applying by Rotary Buffer
Work one section at a time. Set rotary buffer to approximately 1000-1500 RPM’s.
Dispense a small amount of the compound directly onto the paint and begin working in a 2’ x 2’ area with overlapping passes. Continue working until a light film remains.
Wipe off residue before the product dries with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel. Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply the in sections like this over the vehicle.
Meguiar’s M205 Mirror Glaze Ultra Finishing Polish is an ultra fine finishing polish for achieving the highest levels of gloss and clarity following a compounding process. The micro abrasive, non gumming formulation provides for a long working time without drying out. Achieve stunning levels of gloss on paint with professional grade Meguiar’s M205 Ultra Finishing Polish. With Meguiar’s M205 Ultra Finishing Polish permanently remove swirls and light defects from all paints, produce deep reflections and high gloss, and eliminate holograms and buffer swirls from a more aggressive compounding step.
EXCEPTIONAL RESULTS: Advanced technology formula provides a deep gloss and rich, swirl-free results
NO MORE SWIRLS: Permanently removes swirls and light defects from all paint
STUNNING SHINE: Produces deep reflections and high gloss
EASY TO USE: Smooth buffing feel, easy wipe-off, and fast clean-up
MULTIPLE WAYS TO APPLY: Formulated for use by Hand, DA Polisher, or Rotary Buffer
Application
Method 1: Applying by hand
Using a Meguiar’s Foam Applicator Pad, distribute a small amount of the Ultra Finishing Polish.
Work in a 1-2 square foot area in a circular pattern, making 4-6 overlapping passes per section.
Without letting the polish dry, use a fresh, clean Meguiar’s Supreme Shine Microfiber Towel to remove the residue. Flip your towel to a clean side for a final wipe.
Reapply the polish if you didn’t remove the light defects with the first application. Apply the polish in sections like this over the vehicle.
Method 2: Applying by Meguiar’s MT300 Dual Action Polisher
Attach Meguiar’s Yellow Foam DA Polishing Disc – DFP5 or DFP6 to the MT300 DA Polisher. Dispense a small amount of the Ultra Finishing Polish directly onto the pad.
Set the MT300 DA Polisher speed to 4,800 OPM. Work in a 2’ x 2’ section applying 2 to 3 overlapping passes with moderate pressure. Do not allow the Polish to dry.
Wipe off the residue with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel.
Reapply the polish if you didn’t remove the light defects with the first application. Apply the polish in sections like this over the vehicle.
Method 3: Applying by rotary buffer
Work one section at a time. Set rotary buffer to approximately 1000-1500 RPM’s.
Dispense a small amount of Ultra Finishing Polish directly onto the paint and begin working in a 2’ x 2’ area with overlapping passes using a Rotary Foam Polishing Pad – WRFP7. Continue working until a light film remains.
Remove the residue before the product dries with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel. Flip your towel to a clean side for a final wipe.
Apply the Ultra Finishing Polish in sections like this over the vehicle. If you are looking to remove light paint defects and they are still present, repeat this process multiple times in sections over the vehicle.
100%
of reviewers would recommend this product to a friend
Ease of Use
Rated 1 out of 5
Easy
Hard
Value
Rated 4 out of 5
Poor
Excellent
2 Reviews
Age Range
State
JM
John M.Reviewed by John M.
Verified Buyer
I recommend this product
Age Range
55-64
State
VIC
Rated 5 out of 5
Review posted
Meguiars Professional M105 + M205 Polishing Bundle Kit
Kit was delivered promptly with no fuss. Much appreciated
Loading...
Ease of Use
Rated 2 out of 5
Easy
Hard
Value
Rated 4 out of 5
Poor
Excellent
Was this helpful?
HE
Hugh E.Reviewed by Hugh E.
Verified Buyer
I recommend this product
Age Range
65+
State
VIC
Rated 5 out of 5
Review posted
good quality & easy coverage easily shined up my newly painted 1949 Vanguard
This was my first effort at painting a car solo due to Covid lockdown. To maintain originality with my 72 yr old Standard Vanguard I used Acrylic paint & elected not to use clear coat. Used 'elbow grease' instead so I THOUGHT IT IMPORTANT TO USE A GOOD CUTTING COMPOUND & OLD STYLE ROTARY POLISHER. Although I had to wait 12 days for delivery from one side of Melbourne to the other (not Detail Store fault) the Meguiars products were worth the wait as I attained a really high level shine with not as much effort as I had envisioned.