Use Meguiar’s M105 Mirror Glaze Ultra-Cut Compound to remove scratches, severe swirls/holograms, acid rain and other defects from your paint finish and leave it with a best-in-class mirror-like gloss. Our exclusive super micro-abrasive technology features ultra-fast cutting ability to remove 1200 grit or finer sanding marks. This professional grade formula is safe and effective on all glossy paint finishes, including clear coats.
DEFECT REMOVAL: Great for removing scratches, defects, acid rain and severe swirls/holograms
ULTRA-FAST COMPOUNDING: Ultra-fast cutting removes 1200 grit or finer sanding marks
SUPERIOR FINISH: Exclusive super micro-abrasive technology leaves best-in-class finish
CLEAR COAT SAFE: Safe and effective on all glossy paint finishes including clear coats
VERSATILE USE: Formulated for use by hand, dual action polisher or rotary buffer, and is body shop safe. Also available in 8 oz and 1 gallon sizes
Application
Method 1: Applying by hand
Distribute a small amount of compound on aMeguiar’s Soft Foam Applicator Pad
Work in a 1-2 square foot area in a circular pattern, making 4-5 overlapping passes per section to ensure that the compound has been properly applied.
Without letting the product dry, use a fresh, cleanMeguiar’sSupreme Shine Microfiber Towelto remove the residue.Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.
Method 2: Applying by Meguiar’s MT300 Dual Action Polisher
AttachMeguiar’s Red Foam DA Cutting Discto theMT300 DA Polisher. Dispense a small amount of the compound directly onto the pad.
Set theMT300 DA Polisherspeed between 4,800-5.800 OPM’s. Work in a 2’ x 2’ section applying 2 to 3 overlapping passes with moderate pressure, followed by light pressure for following 2 passes. Do not let product fully dry.
Wipe off the residue with a fresh, cleanMeguiar’sSupreme Shine Microfiber Towel.Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.
Method 3: Applying by Rotary Buffer
Work one section at a time. Set rotary buffer to approximately 1000-1500 RPM’s.
Dispense a small amount of the compound directly onto the paint and begin working in a 2’ x 2’ area with overlapping passes. Continue working until a light film remains.
Wipe off residue before the product dries with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel. Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply the in sections like this over the vehicle.
100%
of reviewers would recommend this product to a friend
Ease of Use
Rated 1 out of 5
Easy
Hard
Value
Rated 5 out of 5
Poor
Excellent
3 Reviews
Age Range
State
SS
Sam S.Reviewed by Sam S.
Verified Reviewer
I recommend this product
Age Range
25-34
State
VIC
Rated 5 out of 5
Review posted
Great product
Had some fine sand paper marks that other compounds wouldn't get out, but the Meguiars mirror glaze cut compound came up with the goods! Finished off with the mirror glaze polish, the panels came up a treat!
Loading...
Ease of Use
Rated 1 out of 5
Easy
Hard
Value
Rated 5 out of 5
Poor
Excellent
Was this helpful?
NP
Naga P.Reviewed by Naga P., from Australia
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted
Superb!
One of the nest cutting compounds on the market.
Loading...
Was this helpful?
FC
Fatek C.Reviewed by Fatek C., from Australia
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted
Better thank expected
I managed to get a nice deep cut into some heavy marring on a Porche Macan with this compound using a microfibre pad. Definitely a nice overall experience using this heavy cut compound, particularly if you're anticipating more than a single-stage correction.