Q² PPF is very easy to apply flexible one layer coating for all types of PPF & Vinyl. It is designed to extend self-cleaning and maximize hydrophobic properties of any automotive film while being highly durable.
Q² PPF must be applied like a regular coating with criss-cross motion. Ensure good preparation of the paint protection film using Q²M PPF RENEW follow by Q²M Prep or CarPro Eraser for optimal surface bonding.
TIP: Work with reflected light. It will make streaks or smudges more visible and help eliminate them in time. Use the Q²M Suede to perfect the finish.
Q² PPF has been designed to match and perform with all modern paint protection film structure and self-healing properties.
It will enhance colour on both glossy or matte film without changing its finish.
The unique chemical structure of Q² PPF makes it the hardest & coating for vinyl wrap & PPF on the market while being super slick & easy to apply. It will add great chemical resistance & hydrophobic properties to the surface, creating a thick & slick layer of protection without compromising the self-healing capabilities of the film applied to.
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and use Gyeon Prep or CarPro Eraser to remove all traces of old wax, polish or oils with a new good quality microfibre cloth. It is highly recommended to use a good surface cleaner such as Gyeon Prep or CarPro Eraser before application of any Gyeon Coating.
If the PPF is scratched, oxydized or contaminated, make sure to polish with Q2M PPF Renew.
Shake the Gyeon PPF well, take one of the applicator cloths on top of the applicator block and apply a small amount of coating to it. Wipe over a section (about half a panel)in a criss cross motion. Pay attention to the leveling of the coating. If needed, do a second pass to achieve a perfectly even layer
Wipe off immediatley (10s-30s) after applying on the whole panel/section. Please note that the wipe off time will vary depending on heat/humidity.
The coat is fully dry after 24 hours. We recommend not getting the coating wet for at least 24 hours to allow it to properly cure, and not washing your car for a minimum of 14 days.
It is advised that you coat your car in a cool and covered area. Do not apply in direct sunlight.