The P&S x Apex Customs Iron & Brake Buster Cleaning Kit consists of:
P&S Brake Buster Wheel Cleaner - 473ml
Iron Buster Wheel & Paint Decon Remover - 473ml
Microfiber Wheel Brush - Medium
Wheely Clean Brush
P&S Brake Buster Wheel Cleaner safely removes accumulated brake dust, oil, dirt, stains and light corrosion from wheels without damaging the surface.
Brake Buster Wheel Cleaner is a unique cleaning gel that adheres to the wheel surface and penetrates the dirt deposits to clean them away.
Brake Buster contains corrosion inhibitors that leaves a layer of protection on the wheel to protect from future corrosion.
Foaming Wheel Cleaner
Safe on all Wheel Surfaces
Removes Brake Dust
Shake the bottle.
Cover the rim surface with Brake Buster. We recommend that you spray as needed and cover the entire surface. The product is effective at dirt removal so a little goes a long way. Be sure it contacts the entire surface.
Allow the product to dwell for 30 to 60 seconds. (Up to 2 minutes) in the shade. Do not allow it to dry in the sun.
Lightly brush and wash as required.
Iron Buster Wheel & Paint Decon Remover is a colour changing, fast acting, pH balanced cleaner formulated to safely dissolve ferrous particulate from wheel and painted surfaces.
Iron Buster will safely and effectively remove embedded iron particulate along with other contaminants from wheels and painted surfaces. Once applied Iron Buster will change to a purple colour when iron particulates are present and then a rinse should be followed for a clean surface.
For paint - Wash and dry surface prior to product application for maximum effectiveness. Pre washing for wheels is not required. Once surface has been prepared spray a generous amount of Iron Buster to the paint and/or wheels. Allow product to dwell for 2 - 3 minutes. Do not alloy product to fully dry on surface. Rinse thoroughly with water using hose or pressure washer. Repeat process if necessary. For a full deep wheel cleanse follow with P&S Brake Buster.
Microfiber Wheel Brush - Size M
Our dedicated microfiber wheel brushes are made from the same ultra plush mitt fibers that are soft to the touch and durable to last after repeated months of use. These wheel brushes which comes in two lengths provide a versatile method to clean the deep spokes of your wheel which can be hard to reach.
This ensures a soft non-scratch thorough cleanse for any wheel surface - glossy or matt (no more spray back of grime into your eyes/face). The soft rubberised handles ensure your grip and comfort levels are maintained during use.
It is perfectly designed to clean wheels but can also be used to clean grills, spokes, door jams, engine areas, and other tight locations.
Made in Korea
Clean wheels easier & more effectively
Made from microfiber to prevent scratching & damage to sensitive wheel finishes
Unique design can bend / flex
Length = 40cm
We searched long and hard for a wheel brush that was not only effective, but ergonomic to handle and a pleasure to use. It didn’t exist, so we created one!
The Wheely Clean Brush features ultra-fine feathered soft bristles capable of bending and flexing around wheel contours and spokes while maintaining its shape, a balanced handle wrapped in neoprene for maximum comfort, this is guaranteed to revolutionize wheel cleaning and turn it into one of your favourite parts of detailing.